It
is only fitting that the flagship model of Triumph’s modern success story
should receive the centenary treatment too. The power-packed Centennial Edition
Daytona keeps the 2002 engine and chassis modifications but reverts to a
single-sided swing-arm for this special edition. A color-matched seat cowl and
carbon fiber side panels and cockpit infills set-off the sensational one-off
Aston Green paint scheme. A special milestone centenary badge completes the
look.
Color:
Aston Green
|
Engine |
|
|
Type |
Liquid-cooled, DOHC, in-line 3-cylinder |
|
Capacity |
955cc |
|
Bore/Stroke |
79 x 65mm |
|
Compression Ratio |
12.0:1 |
|
Fuel System |
Multipoint sequential electronic fuel injection |
|
Ignition |
Digital - inductive type - via electronic engine management system |
| Transmission | |
| Primary Drive | Gear |
| Final Drive | X-ring chain |
| Clutch | Wet, multi-plate |
| Gearbox | 6-speed |
| Cycle Parts | |
| Frame | Aluminum beam perimeter |
| Swingarm | Single-sided, aluminum alloy with eccentric chain adjuster |
| Front Wheel | Alloy 3 spoke, 17 x 3.5in |
| Rear Wheel | Alloy 3 spoke, 17 x 6.0in |
| Front Tire | 120/70 ZR 17 |
| Rear Tire | 190/50 ZR 17 |
| Front Suspension | 45mm forks with dual rate springs and adjustable pre-load, compression and rebound damping |
| Rear Suspension | Monoshock with adjustable pre-load, compression and rebound damping |
| Front Brakes | Twin 320mm floating discs, 4 piston calipers |
| Rear Brakes | Single 220mm disc, 2 piston caliper |
| Dimensions | |
| Length | 2072mm (81.6in) |
| Width | 725mm (28.5in) |
| Height | 1165mm (45.9in) |
| Seat Height | 815mm (32.1in) |
| Wheelbase | 1426mm (56.1in) |
| Rake/Trail | 22.5º / 78.7mm |
| Weight (Dry) | 191kg (420lb) |
| Fuel Capacity | 21 liters (5.5 gal US) |
| Performance (Measured to DIN 70020) | |
| Maximum Power | 149PS (147bhp) at 10,700 rpm |
| Maximum Torque | 100Nm (74ft.lbf) at 8,200 rpm |
| Warranty | 2 years; unlimited mileage |
| Service Intervals | 6000 miles or one year, whichever comes first |
| Notes: |
| * measured at crankshaft to DIN 70020 |
Accessories:
*Performance Aftermarket Silencer – Carbon
Finish
-2x2 carbon weave hi-temp carbon fiber wrap
-thermal blanket protection
-nitro-tec hardened bracket
-stainless steel external construction
-bespoke fuel injection mapping
*Performance Aftermarket Silencer – Stainless
Steel Finish
-Triumph branding
-thermal blanket protection
-nitro-tec hardened bracket
-stainless steel external construction
-bespoke fuel injection mapping
*Tank Bag
-16 liters expandable to 24 liters
-removable map pocket
-integral water resistant cover
-shoulder strap
-separate harness
*Sports Throw-over Panniers
-high visibility reflective edging
-1250 denier polyester construction
-integrated, quick release panel protectors
(also available separately)
-24 liters capacity expandable to 48 liters
-integral water resistant covers
*Integrated Alarm
-two circuit immobilization
-‘fail-safe’ engine immobilization
-‘hot-wire’ detection circuit
-internal rechargeable battery
-current draw of less than 5 mA
-Thatcham MC1 approved
*Sports Top Rack
-integral bungee hooks
*Aero Screen
*Grabrail
*Carbon Fiber Tank Pad
*Carbon Print Tank Pad
*Front Mudguard Extension Kit
*Auxiliary Power Plug
-facilitates remote charging of motorcycle
battery